Friday, November 2, 2012

The Behmor p2 tip

The Behmor roaster doesn’t have user adjustability on the fly as others do. You are stuck at custom build-in profiles. The body of in the coffee is developed between 1. and 2. crack, so extending the time between the cracks is essential.
A great tip I saw at lets you have a little more control over when the heating element is on at full power and at 30%, thus extending the roast. The tip is basically that you preheat the roaster, load in about 200-300 gr of coffee and choose the p2 one pound setting. Then maximize the time and start the roast. When you are near the first crack turn off the lights and watch the heating element, then slowly reduce the time until the heating element does off. When the heating element is of you now that you have reached the 30% power of the profile. Doing this and opening the door shortly will help you to extent the time between first and second crack and achieving more body in your coffee.


  1. Hi there, simply was aware of your blog thru Google, and found that it's truly informative. I am going to

    be careful for brussels. I’ll appreciate in

    case you proceed this in future. Numerous other

    folks can be benefited from your writing. Cheers!
    Visit my web blog

  2. hey there and thank you in your information - I’ve

    definitely picked up anything new from right here.
    I did then

    again experience several technical points the usage of

    this web site, as I experienced to reload the website many occasions prior to I could
    get it to load properly. I

    have been considering if your hosting is OK?
    No longer that I am complaining, however sluggish loading cases times will very frequently affect
    your placement in google and can damage your high quality score
    if ads and ***********
    Feel free to surf my blog post ::